Product ID:GA5-006 MIL-E-52798
MSDS Date:01/01/1985
FSC:8010
NIIN:00-111-8338
MSDS Number: BCZGF

ENTERPRISE CHEM COATING CO.

Emergency Phone: 312-376-9150

Cage: KO114

ENTERPRISE CHEMICAL COATING CO DIV OF INSILCO CORP

CHICAGO, IL 60608-5322 US

Cage: 60035

LEAD DRIER (OSHA PEL FROM 29CFR 1910.1025)

Fraction By Weight: <0.5%

OSHA PEL 0.05 MG/M3 (PB)

ACGIH TLV: 0.15 MG/M3 (PB);8990

NAPHTHA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: SE7555000

Fraction By Weight: 40.0%

OSHA PEL 100 PPM

DIACETONE ALCOHOL (4-HYDROXY-4-METHYL-2-PENTANONE)

CAS: 123-42-2

RTECS: SA9100000

Fraction By Weight: <0.5%

OSHA PEL 50 PPM

ACGIH TLV: 50 PPM; 9192

Effects of Overexposure:HEADACHE,NAUSEA, SKIN AND EYE IRRITATION. LEAD
POISONING METALLIC TASTE,VOMITING,NAUSEA

First Aid:INHAL:REMOVE TO FRESH AIR.RESTORE BREATHING IF NEEDED. CALL
DR. EYES:FLUSH WITH WATER AT LEAST 15 MIN. CALL DR. SKIN:WASH WITH
SOAP AND WATER.

Flash Point:104F, 40 C TCC
Lower Limits:0.7
Upper Limits:6.5
Extinguishing Media:CLASS B FIRE EXTINGUISHER
Fire Fighting Procedures:SELF CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:ISOLATE FROM HEAT,ELECTRICAL EQUIP.SPARKS
AND OPEN FLAME

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
VAPORS.VENTILATE AREA.CONTAIN AND REMOVE WITH INERT ABSORBENT AND
NON-SPARKING TOOLS.

Handling and Storage Precautions:LARGE AMTS IN BUILDINGS DESIGNED AND
PROTECTED FOR STORAGE,IN COMPLIANCE WITH OSHA 1910.106.
Other Precautions:CHROMIUM CONTAINING USE RESPIRATOR DURING SPRAYING OR
SANDING.

Respiratory Protection:RESPIRATOR MEETING TC-23C-80
Ventilation:USE LOCAL EXHAUST TO KEEP BELOW TLV.
Protective Gloves:NORMALLY NO
Eye Protection:SAFETY WITH SPLASH GUARD.
Supplemental Safety and Health

HCC:F4
Boiling Pt:B.P. Text:340F,171 C
Vapor Pres:2
Vapor Density:4.9
Spec Gravity:1.230
Evaporation Rate & Reference:< BUTYL ACETATE
Solubility in Water:NEGLIGIBLE
Appearance and Odor:BROWN LIQUID WITH ALIPHATIC ODOR.
Percent Volatiles by Volume:61.0

Stability Indicator/Materials to Avoid:YES
CO COULD FORM DURING BURNING
Stability Condition to Avoid:SPARKS,OPEN FLAME
Conditions to Avoid Polymerization:ELEVATED TEMPERATURES.

Waste Disposal Methods:DISPOSE IN ACCORDANCE WITH LOCAL,STATE AND
FEDERAL LAWS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.